LeSabre V6-231 3.8L VIN L SFI (1992)
Rear Bumper Cover / Fascia: All Technical Service Bulletins
Bumper - Fascia Repair Procedure
Group Ref.: Body
Bulletin No.: 301001
Date: January, 1994
SUBJECT:
FASCIA GAPS TO BRIGHT STRIP - FRONT AND REAR (REPAIR METHODS)
MODELS:
1992-94 BUICK LESABRE
Some owners may experience one or more of the following conditions:
A. a gap between the bright bar and the lower fascia
B. the outer molding on the side of the fascia not being aligned with the bright Strip on the impact bar
C. bulge in the side of the fascia below the outer molding (see figure 1)
These conditions, if present on either front or rear fascia, may be corrected using the following procedures.
SERVICE PROCEDURE:
The following steps should be performed in order.