LeSabre V6-231 3.8L VIN L SFI (1992)
2.
Shift the bottom of end bracket forward.
3.
Retighten.
NOTE:
Depending on how the I/P is "cocked", you may need to loosen all (3) screws to shift the bracket(s) enough and in the direction necessary to
get proper alignment. Retighten all screws replace all parts - reinspect.
WARRANTY INFORMATION:
Select the labor operation number and time from those listed below for the correction Step used:
Step 1
Labor Operation No.: T5276
Labor Time: .4 hr.
Step 2
Labor Operation No.: T5277
Labor Time: 1.2 hr.
Step 3
Labor Operation No.: T5278 (Right)
Labor Time: 1.1 hr.
Labor Operation No.: T5279 (Left)
Labor Time: 1.1 hr
Labor Operation No.: T5280 (Both)
Labor Time: 1.3 hr.
Add: To Rework Brackets
Labor Time: .3 hr. (One)
Labor Time: .4 hr. (Both)