LeSabre V6-231 3.8L VIN L SFI (1992)
Timing Cover: Service and Repair
Installation
Front Cover
INSTALL OR CONNECT
NOTE: Crankshaft sensor requires no adjustment.
1. Gasket at cylinder block.
2. Front cover and attaching bolts.
-
Apply sealant GM P/N 1052080 or equivalent to bolt threads.
-
Tighten bolts to 30 Nm (22 lbs. ft.).
3. Oil pan to front cover bolts.
-
Tighten to 14 Nm (124 lbs. in.).
4. Crankshaft sensor.
5. Sensor shield.
6. Balancer and bolt.
-
Tighten balancer bolt to 150 Nm (111 lbs. ft.) +76°.
7. Drive belt(s).
8. Torque axis mount.
-
Tighten bolt to 87 Nm (65 lbs. ft.)