LeSabre V6-231 3.8L VIN L SFI (1992)
Impact Sensor: Service and Repair
Forward Sensors
Fig. 315 Forward Sensor Removal
1.
Deactivate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG DEACTIVATION.
2.
Disconnect forward sensor electrical connector, then remove harness retaining clips, Fig. 315.
3.
Remove two sensor mounting bolts, then remove sensor.
4.
Reverse procedure to install, noting the following:
a. Torque sensor mounting bolts to 62 inch lbs.
b. Following installation, activate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG ACTIVATION.
c. Turn ignition switch to the On position and verify the ``Inflatable Restraint'' indicator flashes 7 to 9 times then turns Off. If indicator does not
respond, refer to DIAGNOSIS AND TESTING PROCEDURE/TESTING PROCEDURES/RETRIEVING TROUBLE CODES.
