LeSabre V6-231 3.8L VIN L SFI (1992)
NOTE:
Due to the minimal size difference between a "larger" and a "small" checkball, it is recommended that if the checkballs need replacing, all (9) nine sized
checkballs be discarded and replaced with checkballs (.25" diameter) in service package # 0104918. It should also be noted that since checkball # 6 was
not suspect in this bulletin, it must be saved and reused.
Parts are currently available from GMSPO.
LABOR TIME INFORMATION:
Labor time should be charged under Operation Number K-6540, for "Valve Body and Oil Pump Assembly-R and R or Replace," or K-7461 "Channel
Plate and/or Gasket-Replace," from the 1992 Labor Time Guide Manual.
SERVICE MANUAL REFERENCE:
Refer to the 1992 Service Manual, Automatic Transaxle On-Vehicle Service Section 7A for proper On-Vehicle Service to remove and replace a control
