LeSabre V6-252 4.1L (1982)
Power Seat Control Module: Technical Service Bulletins
Six-Way Power Seat - Inoperative
Model Year 1983
Bulletin No. 83-73
File In Group Body
Number 14
Date Feb., 83
SUBJECT:
Inoperative Six-Way Power Seat - 1982-1983 Vehicles Equipped With Memory Seat
An inoperative memory six-way power seat system can be caused by a low voltage condition at the module. If the module sees a voltage lower than 10.5
volts, it will become inoperative.
A second faulty condition may also exist. When operating in the manual mode, seat motion will stop, even though switch is still depressed and end of
travel is not reached. Reactuating switch will cause seat to begin moving again.
All manufacturing and field stock is being modified at this time. All modules with a date code of 2340, or lower, is of the first type and requires
modification. This code (2 = year 82, 340 = 340th day of year) is stamped in white ink on the module.
In the event that this condition occurs and a module is not available, the six-way seat can be operated without the memory seat feature by disconnecting
the module and reconnecting the wiring without the module in place.
