buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Blower Control Module|Page 11910 > < Blower Control Module|Page 11908
Page 1
background image

Control Module HVAC: Service and Repair
HVAC Programmer

PROGRAMMER REPLACEMENT FOR AUTOMATIC A/C (CJ2)

Programmer Assembly

REMOVE OR DISCONNECT       

-Disable Supplemental Inflatable Restraint (SIR) system, See: Body and Frame/Interior Moulding / Trim/Dash Board / Instrument Panel/Air
Bag(s) Arming and Disarming

1. Instrument Panel (I/P) compartment, disengage stops and swing down.

2. Electrical and vacuum connectors.

3. Driver temperature valve link rod.

4. Screws and programmer from vehicle.

INSTALL OR CONNECT 
       

1. Screws after positioning programmer.

^

Tighten screws to 1.4 Nm (12 lb. in.).

2. Electrical and vacuum connectors.

Blower Control Module|Page 11910 > < Blower Control Module|Page 11908