LeSabre V6-3.8L VIN K (1996)
Audible Warning Device: Symptom Related Diagnostic Procedures
Troubleshooting Hints - Reminder Package
PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. Check I/P Fuse Block fuse ID, fuse 3E (Oldsmobile with UH8 or U2A cluster) and fuse 9C (Oldsmobile with UH8 or U2A cluster).
2. Check Relay Center fuse 8 (Oldsmobile with UH8 or U2A cluster only) by visual inspection.
3. Before component replacement, check for poor terminal contact at component and related harness connectors.
4. Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.
5. Check for a broken (or partially broken) wire inside of insulation which could cause system malfunction but prove "GOOD" in a
continuity/voltage check with a system disconnected. (Refer to General Troubleshooting Procedures). See: Diagrams/Diagnostic Aids
