LeSabre V6-3.8L VIN K (1996)
Mass Air Flow (MAF) Sensor: Service and Repair
Mass Air Flow Sensor W/MAP Sensor
REMOVE OR DISCONNECT
1. Disconnect the Mass Air Flow (MAF) sensor electrical connector.
2. Remove the three (3) screws holding MAF sensor to throttle body.
3. Remove the MAF sensor from the throttle body.
INSTALL OR CONNECT
1. Carefully position the MAF sensor to the throttle body.
2. Install three (3) screws holding the MAF sensor to the throttle body.
3. Connect the electrical connector.
