LeSabre V8-307 5.0L (1983)
FIGURE 2 - LOWER BED SIDE - CATALYTIC CONVERTER
11.
Lay the converter down on a flat surface with the lower bed fill hole on top. Figure 2.
12.
Insert the fill plug into the lower bed fill hole. The fill plug outer rim must rest against the converter body.
FIGURE 3 - TORQUE SPECIFICATION
13.
Insert the plug installer tool (J-34118) into the fill plug and tighten to a torque of 47 N-m (35 ft.lbs.). Figure 3.
14.
Install the converter on the vehicle by reversing the removal procedure.
CAMPAIGN IDENTIFICATION LABEL
15.
Install a Campaign Identification label. Each vehicle modified in accordance with the instructions outlined in this Service Procedure will
require a Campaign Identification label. Each label provides a space to include the campaign number, the five (5) digit dealer code of the
dealer performing the campaign service, and the date vehicle was campaigned. This information may be inserted with a typewriter or
ballpoint pen. When installing label, clean the surface of the radiator upper mounting support and apply the campaign label where it is readily
