buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Air Injection Pump > < All Technical Service Bulletins for Air Injection Hose/Tube:|846E3
Page 1
background image

Air Injection Hose/Tube: Customer Interest
A.I.R. Pipe - Hitting Body Heat Shield

Bulletin  84-6E-3

Date

Nov. '83

Ref. No.

84-046-6E

SUBJECT:

CONVERTER A.I.R. PIPE HITTING HEAT SHIELD

MODELS AFFECTED: 1984 LESABRES AND ELECTRAS WITH 5.0L V-8 GAS ENGINES

Some 1984 LeSabres and Electras with 5.0L engines may exhibit a noise that sounds like the exhaust system hitting the floor pan. This may be caused by
the A.I.R. pipe to the converter touching the body heat shield.

FIGURE 1

To correct this condition, loosen the A.I.R. pipe to converter clamp, reposition the A.I.R. pipe away from the heat shield and tighten the clamp. There
should be about 1/2 inch clearance at the heat shield. Refer to Figure for location of clearance.

Air Injection Pump > < All Technical Service Bulletins for Air Injection Hose/Tube:|846E3