buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Washer Fluid Level Indicator > < 06-08-43-003C|Page 4489
Page 1
background image

Wiper Switch: Service and Repair

Fig. 10 Windshield wiper switch removal. Models w/tilt column

Fig. 11 Windshield wiper switch removal. Models w/standard column

MODELS W/COLUMN MOUNTED SWITCH

1.

Remove steering wheel as described under ``Horn Sounder and Steering Wheel, Replace.''

2.

Remove turn signal switch as described under ``Turn Signal Switch, Replace.''

3.

Remove ignition lock and buzzer as described under ``Ignition Lock, Replace.''

4.

Remove and install cover and wiper switch as shown in Figs. 10 & 11.

5.

Reverse remaining procedure to install.

MODELS LESS COLUMN MOUNTED SWITCH

1.

Remove headlamp switch knob and escutcheon.

2.

Remove trim plate.

3.

Remove two switch attaching screws, then disconnect wire connector and remove switch.

4.

Reverse procedure to install.

Washer Fluid Level Indicator > < 06-08-43-003C|Page 4489