Lucerne V6-3.8L (2007)
Front Door Striker: Adjustments
DOOR LOCK STRIKER ADJUSTMENT
TOOLS REQUIRED
J 39346-A Mini-Wedge Door Striker Aligner
1. IMPORTANT: Properly align the door before adjusting the striker.
Open the door.
2. Loosen the door striker screws just enough to allow movement of the door striker.
3. Install the J 39346-A.
4. IMPORTANT: Do not slam the door.
Close the door while holding the outside handle in the open position.
5. Open the door.
6. NOTE: Refer to Fastener Notice.
Tighten the door lock striker screws.
Tighten the door striker screws to 25 N.m (18 lb ft).
7. Remove the J 39346-A.
8. Close the door.