Lucerne V6-3.8L (2007)
Cruise Control: Symptom Related Diagnostic Procedures
Cruise Control Switch Indicator Always On
Cruise Control Switch Indicator Always On
Diagnostic Aids
*
Repair any brake system related DTCs before performing this diagnostic.
*
If a BCM has been replaced, the brake pedal position (BPP) sensor must be calibrated. Refer to Brake Pedal Position Sensor Calibration.
*
For an intermittent condition, refer to Testing for Intermittent Conditions and Poor Connections in Diagnostic Aids. See: Testing and
Inspection/Component Tests and General Diagnostics
Test
Step 1 - Step 7