Lucerne V6-3.8L (2007)
Important: Care should be taken when installing the condenser not to damage the lower attachment points of both the radiator and
condenser.
2. Position the condenser, aligning the lower feet to the lower mounting features located at the front of the radiator.
Notice: Refer to Fastener Notice.
Important: The bolts retaining the condenser to the radiator end tanks are a special length and should be the ONLY bolts used upon
reinstallation. The use of longer bolts will damage the radiator end tanks.
3. Install the condenser mounting bolts.
Tighten the bolts to 13 N.m (115 lb in).
