Lucerne V6-3.8L (2007)
10. Ensure that the oil filter gasket is still on the old filter, if not remove the oil filter gasket from the adapter.
Installation Procedure
1. Apply clean engine oil to the NEW oil filter gasket.
Notice: Refer to Fastener Notice.
2. Install the NEW oil filter.
Tighten the new oil filter to 3/4 to 1 full turn, after the oil filter gasket contacts the adapter.
3. Tighten the oil pan drain plug.
Tighten the plug to 30 N.m (22 lb ft).
4. Remove the oil drain pan from under the vehicle.
