Lucerne V6-3.8L (2007)
5. Remove the oil filter adapter bolts.
6. Remove the oil filter adapter and gasket.
7. Remove the oil filter pressure relief valve and spring.
8. Clean the parts in a suitable solvent. Dry the parts.
9. Clean the oil filter adapter gasket mating surfaces.
Installation Procedure
1. Install the oil filter pressure relief valve spring and valve.
2. Position the oil filter adapter gasket and adapter.
Notice: Refer to Fastener Notice.
3. Install the oil filter adapter bolts.
Tighten the bolts to 50 N.m (37 lb ft) plus an additional 3 degrees using J 45059.