Lucerne V6-3.8L (2007)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Wiring Harness Replacement (With RPO Code NU6)
Fuel Level Sensor Wiring Harness Replacement (RPO NU6)
Removal Procedure
1. Remove the fuel tank.
2. Cut the tape (1 and 2) securing the fuel tank vent line to the fuel feed line.
3. Remove the retainer (3) from the vent and fuel feed lines.
4. Disconnect the fuel feed line quick connect fitting from the module.
5. Remove the fuel feed line.
