Lucerne V6-3.8L (2007)
Fuel Line Coupler: Service and Repair
Plastic Collar Quick Connect Fitting Service
Plastic Collar Quick Connect Fitting Service
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution
Important: There are several types of plastic collar fuel and EVAP quick connect fittings that may be used on this vehicle.
* Bartholomew (1)
* Q release (2)
* Squeeze to release (3)
* Sliding retainer (4)
* Push down TI (5)
The following instructions apply to all of these types of fittings except where indicated.
Relieve the fuel system pressure. Refer to Fuel Pressure Relief.
Caution: Wear safety glasses when using compressed air, as flying dirt particles may cause eye injury.
1. Using compressed air, blow any dirt out of the quick connect fitting.