buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Fuel Feed Rear Pipe Replacement (With RPO Code NT7)|Page 11829 > < Fuel Feed Rear Pipe Replacement (With RPO Code NT7)|Page 11827

Lucerne V6-3.8L (2007)

Page 3
background image

9. Disconnect the chassis EVAP line quick connect fitting (1) from the EVAP canister.

10. Drill out the rivets (5) securing the retainer (2) to the underbody.
11. Disconnect the retainers (3, 4 and 1) from the underbody.
12. Remove the fuel/EVAP lines from the vehicle and place on a suitable work surface.
13. Remove the fuel line from the retainers.

Installation Procedure

Fuel Feed Rear Pipe Replacement (With RPO Code NT7)|Page 11829 > < Fuel Feed Rear Pipe Replacement (With RPO Code NT7)|Page 11827