Lucerne V6-3.8L (2007)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement (With RPO Code NU6)
Fuel Level Sensor Replacement (RPO NU6)
Removal Procedure
Caution: Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased
exposure to vapors:
* Use forced air ventilation such as a fan set outside of the trunk.
* Plug or cap any fuel system openings in order to reduce fuel vapor formation.
* Clean up any spilled fuel immediately.
* Avoid sparks and any source of ignition.
* Use signs to alert others in the work area that fuel system work is in process.
1. Remove the fuel sender.
2. Release the fuel level sensor electrical connector clip.
3. Disconnect the fuel level sensor electrical connector (1) from under the fuel sender cover.
4. Release the locking tab (2) and slide the fuel level sensor (3) down off of the bucket.
Installation Procedure
