buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Fuel Level Sensor Wiring Harness Replacement (With RPO Code NT7)|Page 17033 > < Fuel Level Sensor Wiring Harness Replacement (With RPO Code NT7)|Page 17031

Lucerne V6-3.8L (2007)

Page 3
background image

1. Install the electrical harness.
2. Connect the fuel tank electrical harness connector to the module.
3. Install the electrical harness to the retaining features on the fuel tank.

4. Install the fuel tank vent lines.
5. Connect the fuel tank vent line quick connect fittings to the module.

Fuel Level Sensor Wiring Harness Replacement (With RPO Code NT7)|Page 17033 > < Fuel Level Sensor Wiring Harness Replacement (With RPO Code NT7)|Page 17031