Lucerne V6-3.8L (2007)
Stabilizer Link: Service and Repair
Rear Suspension
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the stabilizer shaft link bolts.
3. Remove the stabilizer shaft link insulators and spacer.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Loosely install the stabilizer link insulators, spacer, nut and bolt.
Tighten the stabilizer shaft link nut to 15 N.m (11 lb ft).
2. Lower the vehicle.