Lucerne V6-3.8L (2007)
1. Install the new gasket on the air compressor assembly.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the air compressor head on the air compressor assembly with the three bolts.
Tighten the three bolts to 6 N.m (53 lb in).
3. Connect the air hose to the air compressor head.
4. Install the two wire terminals in the air compressor connector.
5. Install the wrap around four wires and secure with two harness ties.
6. Install four wires in the harness tie and install the harness tie on the air compressor head with the bolt.
Tighten the bolt to 3 N.m (26 lb in).
7. Install the air dryer.
8. Install the heat shield and the harness tie on the air compressor bracket with the two bolts.
Tighten the two bolts to 4 N.m (35 lb in).
9. Connect the air compressor connector to the connector anchor.
10. Install the air compressor on the vehicle.
