Lucerne V6-3.8L (2007)
Torque Converter Clutch Solenoid: Service and Repair
Torque Converter Clutch Pulse Width Modulation Solenoid Replacement
Removal Procedure
1. Remove the case side cover.
2. Disconnect and reposition the electrical connectors from the following:
*
The internal mode switch if equipped
*
The 2-3 shift solenoid valve assembly (315B)
*
The transmission fluid pressure (TFP) manual valve position switch (395)
Important: Do NOT remove the bolt (205) that holds the oil pump together.
3. Remove the oil pump bolts (206, 207).
4. Remove the oil pump (200) from the valve body (300).