Lucerne V6-3.8L (2007)
Notice: Refer to Fastener Notice.
4. Install the 2-1 manual servo piston cover bolts.
Tighten the 2-1 manual servo piston cover bolts to 25 N.m (18 lb ft).
5. Use a screwdriver in order to lock the lube oil pipe retainer into the case.
6. Install the accumulator assembly attaching bolts.
Tighten the accumulator bolts and the 2-1 manual servo bolts to 12 N.m (106 lb in).
7. Install the new oil filter seal.
8. Lower the vehicle.
9. Fill the transaxle to the proper level. Refer to Fluid Capacity Specifications.
10. Inspect the transaxle fluid level.
11. Inspect the oil pan gasket for leaks.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
12. Reset the TAP values. Refer to Transmission Adaptive Functions.
