Lucerne V6-3.8L (2007)
9. Install the transmission fluid pressure (TFP) manual valve position switch assembly (395) onto the control valve body (300).
Important: Finger start the bolts to prevent cross-threading.
10. Install the control valve body bolts (374-381, 384) as indicated.
Notice: Refer to Fastener Notice.
Important:
*
Tighten the bolts in a spiral pattern starting with the bolts at the center of the control valve body.
*
If the bolts are tightened at random, valve bores may become distorted and inhibit proper valve operation.
Tighten the control valve body bolts (374-381, 384) as indicated by the following list.
*
The 374 to 12 N.m (106 lb in)
*
The 375 to 12 N.m (106 lb in)
