Lucerne V6-3.8L VIN 2 (2006)
Installation Procedure
1. In any area with excessive damage, space the plug weld holes 40 mm (1 1/2 in) apart.
IMPORTANT: The new hinge has a dimple at the pivot bolt location.
2. Drill an 8.5 mm (21/64 in) hole for the pivot bolt.
3. Drill 8 mm (5/16 in) plug weld holes in the service part as necessary in the locations noted from the original panel.
4. Prepare all of the mating surfaces as necessary.
5. Apply GM-approved Weld-Thru Coating or equivalent to all mating surfaces. Refer to Anti-Corrosion Treatment and Repair.
