Lucerne V6-3.8L VIN 2 (2006)
1. Inspect the brake system for external leaks. Refer to Brake System External Leak Inspection. See: Hydraulic System/Testing and
Inspection/Component Tests and General Diagnostics/Brake System External Leak Inspection
2. Pressure bleed the hydraulic brake system in order to purge any air that may still be trapped in the system.
22. Turn the ignition key ON, with the engine OFF. Check to see if the brake system warning lamp remains illuminated.
23. Important: DO NOT allow the vehicle to be driven until it is diagnosed and repaired.
If the brake system warning lamp remains illuminated, refer to Symptoms - Hydraulic Brakes. See: Hydraulic System/Testing and
Inspection/Symptom Related Diagnostic Procedures