Lucerne V6-3.8L VIN 2 (2006)
6. Remove the rubber cap or plug from the exposed brake pipe fitting end.
7. Install the brake pipe fitting to the brake hose.
Tighten the brake pipe fitting to 15 Nm (11 ft. lbs.).
8. Install the hose bracket and bolt to the strut assembly.
Tighten the bolt to 17 Nm (13 ft. lbs.).
9. Bleed the brake caliper at the brake caliper bleeder screw. Refer to Hydraulic Brake System Bleeding (Manual) Hydraulic Brake System Bleeding
(Pressure).
10. Install the tire and wheel assembly.