Lucerne V6-3.8L VIN 2 (2006)
1. Connect the electrical connectors to the park brake warning light switch.
2. Install the park brake pedal assembly into the vehicle.
3. Notice: Refer to Fastener Notice.
Install the park brake pedal assembly mounting nuts (1, 2) to the vehicle.
Tighten the park brake pedal assembly mounting nuts to 24 Nm (18 ft. lbs.).
4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
5. Reconnect the front park brake cable (3) to the cable connector (1).
6. Lower the vehicle.
