Lucerne V6-3.8L VIN 2 (2006)
Vacuum Brake Booster: Service and Repair
Vacuum Brake Booster Replacement (3.8L V-6)
Removal Procedure
1. Remove the fuel injector sight shield.
2. Disconnect the electrical connector from the exhaust gas recirculation (EGR) valve (1).
3. Disconnect the engine harness clips (3).
4. Position the harness to the side.
5. Disconnect the brake fluid level sensor (1).
6. Remove the master cylinder mounting bolts.
7. Remove the master cylinder. Position the master cylinder to the side.
