Lucerne V6-3.8L VIN 2 (2006)
2. Notice: Refer to Fastener Notice.
Install the thermostat housing and bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Install the radiator inlet hose to the thermostat housing.
4. Using J38185 position the hose clamp at the thermostat housing.
5. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
6. Install the intake manifold cover.