Lucerne V6-3.8L VIN 2 (2006)
1. Notice: The heater cord must not touch the engine, hot pipes, manifold, or any moving parts. Route the cord to the left front of the engine
compartment securing with tie straps as necessary to prevent damage.
Install the coolant heater cord.
2. Connect the coolant heater cord to the coolant heater.
3. Raise the vehicle.
4. Install NEW straps (2) securing the coolant heater cord to the starter cable.
5. Install the front air deflector.
6. Lower the vehicle.
7. Install the coolant heater cord (1) in between the (UBEC and upper tie bar.
