Lucerne V6-3.8L VIN 2 (2006)
Tighten the bolts to 50 Nm (37 ft. lbs.).
4. Position and install the heater inlet (4) and outlet (2) hose adapters. (heater hoses shown removed for clarity).
5. Install the heater inlet and outlet hose adapter bolts (1, 3).
6. Install the generator.
7. Install the drive belt.
8. Install the coolant recovery reservoir.
9. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).