Lucerne V6-3.8L VIN 2 (2006)
4.
Remove the engine mount bracket nut.
5.
Remove the engine right rear mount to frame nut.
6.
Place a suitable hoist/adjustable jackstand and a block of wood under the oil pan.
7.
Lift the engine until the engine front mount lower stud clears the frame.
8.
Remove the engine mount bracket bolts (qty: 3).
9.
Remove the bracket and front engine mount.
10.
Replace the front engine mount with P/N 15910501.
Note:
Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints,