Lucerne V6-3.8L VIN 2 (2006)
Installation Procedure
1. Apply clean engine oil to the NEW oil filter gasket.
2. Notice: Refer to Fastener Notice.
Install the NEW oil filter.
Tighten the new oil filter to 3/4 to 1 full turn, after the oil filter gasket contacts the adapter.
3. Tighten the oil pan drain plug.
Tighten the plug to 30 Nm (22 ft. lbs.).
4. Remove the oil drain pan from under the vehicle.
5. Lower the vehicle.
6. Fill the engine with new engine oil. Refer to Capacities - Approximate Fluid and Fluid and Lubricant Recommendations.
7. Start the engine.
8. Inspect for oil leaks after engine start up.
