Lucerne V6-3.8L VIN 2 (2006)
2. Install the oil pump screen.
3. Install the other oil pump screen bolt and tighten the bolts.
Notice: Refer to Fastener Notice.
Tighten the bolts to 15 Nm (11 ft. lbs.).
4. Install the oil pan.
5. Notice: Do not run the engine until the oil pressure is tested. Running the engine without measurable oil pressure will cause extensive damage.
Notice: Stop the engine and remove the oil pan if the oil pressure does not build up immediately. Check the oil pump pipe and the screen for a
clogged screen, damaged pipe, or a damaged gasket. Running the engine without measurable oil pressure will cause extensive damage.
Inspect and verify that the oil pressure is within specifications.