Lucerne V6-3.8L VIN 2 (2006)
39. Remove the CMP sensor bolt.
40. Remove the CMP sensor.
41. Inspect the timing chain for overall in and out movement. Maximum movement is 25.4 mm (1 inch).
42. Inspect the sprockets for wear.
43. Inspect the oil pan gasket. Replace the oil pan gasket, if necessary.
44. Clean and inspect the water pump. Refer to Water Pump Cleaning and Inspection.
45. Clean and inspect the oil pump. Refer to Oil Pump Cleaning and Inspection.
46. Clean the engine front cover mating surfaces.
Installation Procedure