Lucerne V6-3.8L VIN 2 (2006)
1. Notice: Refer to Exhaust System Inspection Notice.
Install a NEW catalytic converter to manifold gasket over the manifold studs.
2. Install the catalytic converter to the exhaust manifold.
3. Notice: Refer to Fastener Notice.
Install the catalytic converter to exhaust manifold nuts.
Tighten the nuts to 40 Nm (30 ft. lbs.).
4. Install a NEW catalytic converter to muffler gasket over the catalytic converter studs.
5. Notice: Refer to Flex Decoupler Notice.
Position the exhaust system until the flange is over the catalytic converter studs.
6. Install the muffler to catalytic converter nuts.
Tighten the nuts to 25 Nm (18 ft. lbs.).
