Lucerne V6-3.8L VIN 2 (2006)
5. Connect the seat belt retractor pretensioner - RF connector (5) to the seat belt retractor pretensioner - RF (4).
6. Install the CPA (6) to the seat belt retractor pretensioner - RF connector (5).
7. Install the lower center pillar trim.
8. Connect the steering wheel module coil connector (6) to the vehicle harness connector (2).
9. Connect the I/P module connector (3) to the vehicle harness connector (1).
10. Install both CPAs (4, 5) to the steering wheel module coil connector (2) and I/P module connector (1).
11. Install the left lower insulator panel to the I/P.
