Lucerne V6-3.8L VIN 2 (2006)
Ignition Cable: Service and Repair
SPARK PLUG WIRE REPLACEMENT
TOOLS REQUIRED
J 38491 Spark Plug Boot Removal Tool
REMOVAL PROCEDURE
1. Remove the intake manifold cover.
2. Remove the front spark plug wires (2) from the ignition coils.
3. Remove the rear spark plug wires (1) from the ignition coils.
4. Remove the spark plug wires from the spark plugs at the front of the engine using the following steps:
1. Note the position of the spark plug wires before removing the wires.