Lucerne V6-3.8L VIN 2 (2006)
9. Disengage the lower housing clips (1).
10. Disengage the upper housing front tabs from the lower housing.
11. Remove the air cleaner upper housing.
12. Disengage the engine harness electrical connector lever locks at the PCM.
13. Remove the engine harness electrical connectors from the PCM.
14. Remove the PCM from the air cleaner lower housing.
INSTALLATION PROCEDURE
IMPORTANT:
-
Inspect the following areas prior to installing the PCM:
-
No debris in the air filter/PCM housing assembly, or the MAF/IAT sensor inlet screen that may distort the air flow.
-
No signs of damage to the air filter/PCM housing assembly, or the intake air duct. If a problem is found, replace the components as necessary.
