Lucerne V6-3.8L VIN 2 (2006)
11. Connect the EVAP line (2) quick connect fitting at the EVAP canister purge valve.
12. Connect the fuel feed pipe (1) quick connect fitting at the fuel rail.
13. Connect the negative battery cable.
14. Perform the following procedure in order to inspect for leaks:
1. Turn ON the ignition, with the engine OFF for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition, with the engine OFF.
4. Inspect for fuel leaks.
15. Install the intake manifold cover.