Lucerne V6-3.8L VIN 2 (2006)
5. Install the J 45722 to the lock ring.
6. Using the J 45722 and a breaker bar, rotate the fuel sender lock ring clockwise until the ring is locked into place on the fuel tank.
IMPORTANT: Always replace the fuel sender seal when installing the fuel sender assembly. Replace the lock ring if necessary. Do not apply any
type of lubrication in the seal groove.
Ensure the lock ring is installed with the correct side facing upward. A correctly installed lock ring will only turn in a clockwise direction.
7. Remove the J 45722.
