buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Tune-up and Engine Performance Checks > < Knock Sensor Replacement - Position 1|Page 8390

Lucerne V6-3.8L VIN 2 (2006)

Page 3
background image

2. Connect the engine harness electrical connector (1) to the knock sensor.

3. Install the knock sensor heat shield and bolts.

Tighten the bolts to 60 N.m (44 lb ft).

4. Install the transaxle.
5. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).  See: Engine,

Cooling and Exhaust/Cooling System/Service and Repair

Tune-up and Engine Performance Checks > < Knock Sensor Replacement - Position 1|Page 8390