Lucerne V6-3.8L VIN 2 (2006)
1. Install the automatic transmission shift auxiliary position switches (2).
2. Connect the electrical connectors.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the screws to the automatic transmission shift auxiliary position switches (1).
^
Tighten the automatic transmission shift auxiliary position switch retaining screws to 3.5 Nm (31 inch lbs.).
4. Connect the electrical connectors to the radio control switches (2).
5. Install the steering wheel radio controls (2).
6. Install the retaining screws (1) to the steering wheel radio controls (2).
^
Tighten the radio control retaining screws to 3.5 Nm (31 inch lbs.).
7. Enable the SIR System. Refer to SIR Disabling and Enabling Zone.
