buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Positive, Battery Cable > < Battery Negative Cable Disconnect/Connect Procedure|Page 15318

Lucerne V6-3.8L VIN 2 (2006)

Page 2
background image

1. Place the negative battery cable eyelet over the hole in the floor pan.
2. Install the negative battery cable ground bolt.

Tighten the bolt to 36 N.m (27 lb ft).

NOTE:  Refer to Fastener Notice.

3. Connect the body harness electrical connector to the battery current sensor.
4. Connect the body harness electrical connector to the negative battery cable electrical connector.
5. Connect the negative battery cable.

Positive, Battery Cable > < Battery Negative Cable Disconnect/Connect Procedure|Page 15318