Lucerne V6-3.8L VIN 2 (2006)
Important: Do not remove the upper trim cover from the closeout trim cover
11. Do not remove the closeout trim cover from the I/P.
Gently pry the steering column closeout trim cover from the lower trim cover (2).
12. Remove the 2 pan head tapping screws (1) from the lower trim cover (2).
13. Remove the lower trim cover (2).
14. Gently lift the upper trim cover to gain access to the ignition lock cylinder solenoid (1).
15. Remove the black connector (2) from the ignition lock cylinder solenoid (1).
16. Remove the tapping screw (3) from the ignition lock cylinder solenoid (1) mounting hole and the ignition switch assembly.
17. Pry the ignition lock cylinder solenoid (1) off of the ignition lock cylinder case assembly.
Installation Procedure
Important: Do not remove the upper shroud from the closeout trim cover
1. Do not remove the closeout trim cover from the I/P.
Snap the ignition lock cylinder solenoid (1) onto the ignition lock cylinder case assembly.
2. Install the tapping screw (3) into the mounting hole of the ignition lock cylinder solenoid (1) and the ignition switch assembly.
3. Install the ignition lock cylinder.
4. Install the black connector into the ignition lock cylinder solenoid (1).