Lucerne V6-3.8L VIN 2 (2006)
5. Install the lower trim cover (2) onto the steering column.
6. Attach the closeout trim cover to the lower trim cover (2).
Notice: Install the 2 pan head tapping screws (1) to the lower trim cover (2).
7. Tighten the screws to 3 Nm (27 inch lbs.).
Caution: Refer to SIR Inflator Module Coil Caution.
8. Install the steering wheel onto the steering column.
9. Install the tilt lever.
10. Enable the SIR system.
